Dalton Aviation LLC:  129 Loc Doc Place Unit B,  Mooresville, NC 28115  704-799-1658 [email protected]
Dalton Aviation
  • CATAGORY
  • Home
  • News
    • Coming Soon
    • Competition
  • Builders kits
    • *NOTICE*
    • 3.1 meter MX2
    • Yak 54
    • 3.1 meter Giles 202
    • YAK 55
    • Extra 300ML
    • 3.1 meter Extra 300
    • Extra 260 42%
    • 2.8 meter Giles 202
    • 2.8 meter MX2
    • 2.7 meter Extra 300
    • Extra 260 35%
    • 41% PITTS 12 short kit
    • 26% PITTS 12 short kit
    • GB EXTRA 300 68"ws
    • TIGER 60
    • 1/3 scale Taylorcraft short kit
    • Kit spares & Parts >
      • Extra 300ML
      • Extra 260 42% parts
      • Yak 54 parts
    • Staudacher S 600
  • Futaba
    • Futaba Radio Systems >
      • Futab 18SZA
      • Futaba 18SZA with R7014 receiver
      • Futaba 16SZA
      • Futaba 14SGA
      • Futaba 12KA >
        • R3004SB
    • Servos S.Bus
    • Servos Digital
    • Alumin Servo Arms
  • COMBOS
  • Custom Builds
  • Team Dalton
  • Videos
    • Flying Videos
    • Dalton Aviation Policies
    • Contact us
    • Building Videos
  • Events
  • Aircraft Replacement Parts
  • Blog
  • Goldberg Extra 300 Short kit

Builders Kits " Wood is Good"
​

​

  • Futaba SBUS HV Servos
  • Airframe Kits
  • FUTABA
    • Futaba Radio systems
      • Futaba Receivers
    • Futaba Digital Servos
    • Futaba Accessories
  • Desert Aircraft Engines
    • Desert Aircraft Accessories
      • Accessories
        • Fuel tanks & Accessories
  • Kit Spares & Parts
    • Extra 300ML parts
    • Yak 54 parts
    • Extra 260 42% parts
  • News
  • Combos: KIt, Radio, Engine & Accessories

35% EXTRA 260

$1,500.00

35% Extra 260 (Builders Kit)


For the builder that wants the performance of a 40% class aircraft but may have size restrictions or just may want to stay with a slightly smaller model, step into the Extra 260. The Extra can be flown with an engine from 85cc to 120cc single cylinder or twin using such brands as Desert Aircraft or DLE for power.


SPECIFICATIONS

 

WING SPAN   103”              POWER     85/120cc

WEIGHT           25lbs+/-         RADIO        4 CH

WING AREA   2050 sq. in.


The EXTRA 260 FEATURES:




  • Premium Fiberglass Cowl & Wheel Pants
  • Plug In Foam Wings
  • Plug In Foam Stabilizers
  • Foam Vertical Fin & Rudder
  • Carbon FiberWing Tube, Tail Tube, main Landing Gear
  • Designed For Canister Style or Tuned Pipe Exhaust Systems
  • Designed to accommodate 2 Servos Per Wing
  • Designed to accommodate 1 Servos Per Elevator Half
  • Built-in Rudder Tray For Pull-Pull Setup
  • Optional Bays for Rudder Servos In The Tail
Shop

EXTRA 300 LITE

$2,450.00


2019 NEWS: Since the purchase of Dalton Aircraft we are starting to redesign the entire line of aircraft kits, The original designs have a proven history of winning competition worldwide. With our inhouse production facility and more modern materials we are able to make them lighter, stronger and faster building while increasing quality and performance.


The EXTRA 300 ML is a proven winner and 6 time champion of the Tucson Aerobatic Shootout, flown by some of the top pilots in the world!!


2025: The new redesigned Extra 300 LITE utilizes new construction material which lightens the fuselage an avgerage of 3 lbs from the older construction. The fuselage has also been redsigned for much easier construction with a self algining build eliminating the need for full scale plans


Shown in the picture is Kal Reifsnyder, 2019 F3A, USA Jr team member and Tucson Invitational Shootout pilot



CURRENT IMPROVEMENTS


Redesigned fusleage construction materials

Redesigned construction for simpler build

Carbon fiber Wing tube

Carbon fiber sleeve

Carbon fiber Tail Tube

Carbon fiber tail sleeve

Carbon Fiber main Landing Gear

Carbon Fiber Tail Wheel assembly

Foam Belly Pan

Foam Hatch

Single piece hatch Floor

Less part count

LESS WEIGHT












SPECIFICATIONS

WING SPAN   123”              POWER 150/200cc

WEIGHT: 39lbs+/-                  RADIO 4 CH

WING AREA   2850 sq. in.

Shop

YAK 54

$2,450.00

What started out to be a few simple changes ended up as a new plane. The New YAK 54 went through a total redesign from the wheels up. We made it lighter ( by 5 pounds) using newer modern materials which also made it stronger, We made it better looking, Reduced the number of part in the kit to build, cutting down build time and actually making it easier to build. Added a new airfoil. What was once a good flier is now an UNBELIVEABLE preformer



The YAK is a great flying airplane and we have made some great changes including a new cowl for a much better look.



The redesign now has a foam belly pan and foam hatch. Less parts and lighter material for a faster build and improved performance.



The YAK 54 is available now. We cut every kit when you place the order so if we have made a change to make it better you get that generation.



All the parts for our kits are cut in house using the latest CNC processes including two CNC hot wire foam cutters, a CNC 130 watt laser and a very large CNC router. All kits are cut to order so allow time for your personal kit to be cut!!


Like all our kits they are proudly MADE in the USA



IMPROVEMENTS



Carbon fiber Wing tube

Carbon fiber sleeve

Carbon fiber Tail Tube

Carbon fiber tail sleeve

Carbon Fiber main Landing Gear

Carbon Fiber Tail Wheel assembly

Foam Belly Pan

Foam Hatch

Single piece hatch Floor

Less part count

New Cowl Design

LESS WEIGHT



38.5 % Dalton Aviation Yak 54

Wingspan 123.7”

Length 114.3”

Weight 38 lbs +/-

Engine 150cc/222cc


SHIPPING: Shipping charges are not paid at time of order. Charges need to be determined when the kit is boxed and packed. Once ready we will find the best shipping and notify you of the charges. Shipping charges will be paid at that time.

Shop

42% EXTRA 260

$2,450.00

The New 42% is our next step in 40% class of aircraft. The Extra has been designed with the latest techniques to save weight while still being a strong aircraft that anyone can enjoy. Its mid wing design gives it outstanding flight characteristics and gives you a more precise feel.


With its advanced airfoil designs on all flying surfaces the 260 has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds. The Extra 260 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft


The Extra 260 includes Carbon gear, wheel pants, carbon wing tube and tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the Extra 260 allows gives the option for JTEC QC120 canisters or for JTEC HP90 full length tuned pipes to help keep noise down and keep your flying site safe.




42% EXTRA 260

 

SPECIFICATIONS

 

WING SPAN:           123”                         POWER:       150cc +

WEIGHT:                37lbs+/-                     RADIO          4 CH

WING AREA :          2850 sq. in.




Shop

JTEC Cool Breeze Fan System

$59.99
The Cool Breeze Fan System is designed to reduce engine heat after your flight and help prevent vapor lock so you can keep flying all day. The Cool Breeze kit includes the laser cut plywood housing and two fan units. Kit must be assembled and is recommended with use of 4s lipo batteries. Available for 4 inch to 6 in spinner sizes.
Shop

2.8m MX2 Competition Series Builders Kit

$1,599.99

If you love the feel of flying a 40% size plane but need the size of a 100-120cc plane, the 2.8m MX2 Competition Series aircraft is a perfect choice. The 2.8m Competition Series MX2 has been designed by two time Tucson Shootout Champion & U.S Nationals Champion Jason Shulman, along with the expert help of Designer Jerry Hailey and Kevin Young it utilizes the latest techniques to save weight while still being a strong aircraft that anyone can enjoy.


​​​With its advanced airfoil designs on all flying surfaces the 2.8m has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds. The 2.8m Competition Series MX2 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft. The competition Series MX2 includes Carbon gear, fiberglass cowling & wheel pants, Carbon wing tube & tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the MX2 allows for JTEC QC80 canisters or full length tuned pipes to help keep noise down and keep your flying site safe.



  • Specifications:Wing Span: 112 inches (2.8m)
  • Fuselage Length: 101 Inches (without spinner)
  • Engine: 100cc - 120cc
Shop

3.1m MX2 Competition Series Builders Kit

$2,450.00

2018 WINNER of the international IMAC WORLDS!! and winner of the 2016 Clover Creek Invitational, the 3.1m MX2 is one of our latest offering in the Competition Series aircraft. The 3.1m MX2 has been designed by two time Tucson Shootout Champion & U.S Nationals Champion Jason Shulman, along with the expert help of Designer Jerry Hailey and utilizes the latest techniques to save weight while still being a strong aircraft that anyone can enjoy.

​

With its advanced airfoil designs on all flying surfaces the 3.1m has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds. The 3.1m MX2 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft. The MX2 includes Aluminum gear, fiberglass cowling & wheel pants, Carbon fiber wing tube & tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the Radiowave MX2 allows for full length tuned pipes to help keep noise down and keep your flying site safe.



Specifications:

Wing Span: 123 inches (3.1m)

Wing Area: 2710 sq inches

Fuselage Length: 118 Inches with spinner

Engine: 150cc - 220cc

Shop

3.1m Giles 202 Competition Series Builders Kit

$2,450.00
Winner of the 2017 Tucson Aerobatic Shootout. The New 3.1m Radiowave Giles 202 is our latest offering in the Radiowave Competition Series aircraft. As like many, we have always loved the looks of the Giles 202 with its unique straight trailing edge design on the wings so after we released its relative the MX2 we knew it was time to do the Giles. As like our 3.1m MX2, the 3.1m Giles 202 has been designed by two time Tucson Shootout Champion & U.S Nationals Champion Jason Shulman, along with the expert help of Designers Jerry Hailey & Kevin Young who have utilized the latest techniques to save weight while still being a strong aircraft that anyone can enjoy.
​
With its advanced airfoil designs on all flying surfaces the 3.1m has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds. The 3.1m Giles 202 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft. The Giles 202 includes Aluminum gear, fiberglass cowling & wheel pants, Carbon fiber wing tube & tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the Radiowave Giles 202 allows for full length tuned pipes to help keep noise down and keep your flying site safe.


Specifications:
  • Wing Span: 123 inches (3.1m)
  • Wing Area: 2710 sq inches
  • Fuselage Length: 118 with spinner
  • Engine: 150cc - 220cc


Shop

2.8m Giles 202 Competition Series Builders Kit

$1,599.99
The 2.8m Radiowave Giles 202 is our latest offering in the Radiowave Competition Series aircraft. With the same pedigree as its big brother, The 2.8m Giles 202 comes in that 100 to 120cc size for easy of transportation.

Designed by two time Tucson Shootout Champion & U.S Nationals Champion Jason Shulman, along with the expert help of Designer Jerry Hailey and utilizes the latest techniques to save weight while still being a strong aircraft that anyone can enjoy.
With its advanced airfoil designs on all flying surfaces the 2.8m has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds.

​The 2.8m Competition Series Giles 202 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft. The Competition Series Giles 202 includes Carbon Fiber gear, fiberglass cowling & wheel pants, Carbon Fiber wing tube & tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the Radiowave Giles 202 allows for full length tuned pipes to help keep noise down and keep your flying site safe.


Specifications:
Wing Span: 112 inches (2.8m)
Fuselage Length: 101 Inches (without spinner)
Engine: 100cc - 140cc
Shop

3.1m Extra 300 Builders Kit

$2,350.00
The 3.1m Radiowave EXTRA 300 Competition Series has been designed with the latest techniques to save weight while still being a strong aircraft that anyone can enjoy. Its mid wing design has a more refined look and flight characteristics then the other airplanes in its class and its extended fuselage gives a more precise feel and even greater flight tracking. With its advanced airfoil designs on all flying surfaces the 3.1m has exceptional rolling and snapping characteristics while at the same time giving it awesome flight tracking and downline speeds.

​The 3.1m Competition Series Extra 300 was designed for highest levels of IMAC and 3D competition and has proven to be an exceptional aircraft with a top five finish at the 2012 Clover Creek Inviational. The competition Series Extra 300 includes Carbon gear, wheel pants, wing tube and tail tube to keep the airplane light and strong. In times where many pilots are loosing there flying sites the smart design of the Radiowave Extra 300 allows for full length tuned pipes to help keep noise down and keep your flying site safe.


Specifications:
Wing Span: 123 inches (3.1m)
Wing Area: 2725 sq inches
Fuselage Length: 119 Inches with spinner
Engine: 150cc - 220cc
Shop

2.7m Extra 300 Competition Series Builders Kit

$1,499.99
Meet the 2.7m Radiowave Extra 300. This airplane was designed to continue our tradition of competitive, great flying, and high quality airplanes. This airplanes was designed for those people that are looking to get the highest quality in the industry yet have an airplane that they can afford. For those that want to get into the 35% size and are on a budget the 2.7m Extra 300 is the perfect choice. The 2.7m Extra 300 can be setup on a budget by using such engines as the DA-85 without loosing any performance compaired to a 100cc. The extended fuselage version is designed to give the airplane more precise lines for flying which are great for rolling manuevers and IMAC style flying.


Specifications
Wing Span: 106 inches (2.7m)
Wing Area: 2000 sq inches
Fuselage Length: 100 Inches
Engine: 80cc - 120cc
Shop

JTEC Composite Control Horns

$11.99

2 sets per package

Shop
1 2

Airframe Kits

On Sale

On Sale

GOLDBERG EXTRA 300 SHORT KIT
$249.99
$249.99
DA 200 Header Set
$390.00 - $400.00
$390.00 - $400.00
DA 170 Flex Header Set
$140.00
$140.00
DA 150 Flex Header Set
$140.00
$140.00
DA 120 Flex Header Set
$139.00
$139.00
DA 100 Flex Headers Set
$140.00
$140.00
TIGER 60 semi short kit
$249.99
$249.99
Jerry L Smth's "SPOILER"
$499.99
$499.99
YAK 55
$2,450.99
$2,450.99
JTEC Cool Breeze Fan System
$59.99
$59.99
42% EXTRA 260
$2,450.00
$2,450.00
3.1m Giles 202 Competition Series Builders Kit
$2,450.00
$2,450.00
YAK 54
$2,450.00
$2,450.00
3.1m MX2 Competition Series Builders Kit
$2,450.00
$2,450.00
EXTRA 300 LITE
$2,450.00
$2,450.00
3.1m Extra 300 Builders Kit
$2,350.00
$2,350.00
2.8m MX2 Competition Series Builders Kit
$1,599.99
$1,599.99
2.8m Giles 202 Competition Series Builders Kit
$1,599.99
$1,599.99
2.7m Extra 300 Competition Series Builders Kit
$1,499.99
$1,499.99
35% EXTRA 260
$1,500.00
$1,500.00
Staudacher S-600
$2,450.00
$2,450.00
41% pitts 12 short kit
$1,899.99
$1,899.99
1/3 Scale Taylorcraft Short Kit
$499.99
$499.99
26% PITTS 12
$849.99
$849.99
JTEC Composite Control Horns
$11.99
$11.99
Wing Incidence Adjuster
$59.99
$59.99
Proudly powered by Weebly